Power Bank Multifunction Car Starter
Multifunction Jump Starter 20000Mah 12V LCD 4 USB Car Jump Starter Booster Chargeur Batterie Power Bank pour La Plupart des Types De Voitures,Un,20000 MA
[Lightweight and compact]: easy to use starter when car batteries are flat. No chance of misapplication thanks to reverse polarity protection.
[Mobile power supply 3.0 20000MAH with fast charging function] The 20,000 mAh starter power supply has 4 USB3.0 output interfaces via which mobile devices can be charged. It's 75% faster than standard chargers.
[POWERFUL 600A STARTING AID] The starting aid enables 12V vehicles (all gasoline engines or 7L diesel engines) to be started, and delivers a peak current of 600 A. Suitable for cars, commercial vehicles, motorcycles, etc.
[3 INTEGRATED LED POCKET LAMPS] The 3 LED POCKET LAMPS are important for safe starting in the dark (with light / SOS / flash). And in an emergency, it's a lifeline for camping, picnics and adventure travel.
[INTELLIGENT PROTECTION TERMINALS] This power bank with intelligent protection system, the smart cable supplied, protects against short-circuit, overheating, overvoltage, overload, deep discharge, overcurrent and reverse polarity.
Four-step instant start
For a smooth and successful start of your car, please ensure that the car's power supply is greater than two grids at a time.
1) Insert the clip into the starter clip, the power display is recommended to be more than two.
2) The red clip (+) is connected to the positive pole of the car battery; the black clip (-) is connected to the negative pole of the car battery.
3) Get into the car and start it.
4) Remove the clip and start completing it! (It is recommended to remove the clip within 30 seconds)
Device size: 160*80*30mm
Battery capacity: 20000 mAh
Applicable models: petrol car 6.0; diesel car 5.0
Charging time: approx. 2~3 hours
USB interface: 4 interfaces
Peak current: 600A
Autostart voltage: 12V
Charge input voltage: 5V/1A
USB output voltage: 5V/1A/2A
LED lighting and mode change method: Press the switch for 3 seconds to activate constant light mode,
Press again to switch to flash mode, press again to switch to SOS mode.
Double-click the power button to open the red and blue flash, then double-click to exit.
